Industrial Ventilation

Industrial ventilation normally involves factory ventilation and warehouse ventilation.
In warehouses, factories, or workshops, poor ventilation can cause several problems in the heat of the summer.  When a large number of machines are running, the heat created will significantly increase the overall temperature of the building and must be removed.  Employees working in an environment with no ventilation can cause dehydration, heat stroke, and other significant health and safety risks.  It is extremely important to ensure your factory or warehouse has efficient ventilation to keep employees safe, healthy, happy, and productive.  Below are several great solutions we suggest to keep your factory or warehouse cool.

factory cooling, industrial air cooler, wall mount air cooler

Solution 1: Air Coolers

Determine how many air coolers are sufficient, depending on the size of your factory or warehouse , normally 150㎡ per set of air cooler with volume 18,000m³/h(about 10,000cfm).
An wall mount air cooler requires a wall that is load-bearing or a roof that is load-bearing, as the weight of each air cooler is approximately 85kg.  Installation requires a hole cut into the wall or roof that is consistent with the size of the duct, and fixed with a bracket.  Location of the air ducts must be carefully considered to ensure air supply is moving in an efficient manner.  Consulting a professional to assist with installation is recommended.
If it is not feasible to mount the air cooler to your factory or warehouse, portable air coolers with large air volume will also do, our largest portable air cooler reaches 18,000m³/h air volume, which can be placed wherever needed.

Solution 2: Industrial Exhaust Fans + Cooling Pads

An industrial exhaust fan with a cooling pad is a solution that will allow you to save on energy and  costs.  This is an excellent solution frequently used in greenhouses or poultry farms as well.  This solution must be placed on a load bearing wall and is much larger than the solutions listed above.
The recommended air exchange rate for factories is 60 to 120 times per hour, which can easily exhaust the indoor dust, toxic gas, high temperatures, and bad smells.  This solution meets or exceeds this requirement and does so by forming a negative air pressure, bringing in fresh, outdoor air and filtering by a wet curtain.  The air enters the facility at random intervals to form an ecological-like circulation effect, and then the heated and polluted air will be exhausted by the industrial exhaust fans installed on the opposite to the cooling pads,  keeping the indoors fresh and cool.

warehouse wall exhaust fan, warehouse wall ventilation
wall mount exhaust fan, industrial ventilation fan

Solution 3: Industrial Exhaust Fans + Window

The industrial exhaust fan solution works by pulling odors, fumes, and moisture out of the space, sending them outdoors for removal.  Removing the air outside provides cooling and ventilation inside, creating a safer and more comfortable environment.

Typically, the minimum ventilation air exchange rate for a factory or warehouse is 60 times per hour.  To determine how many exhaust fans are needed for your factory or warehouse, you must begin with the dimensions of your factory.

For example, if the factory is of 86m length, 22m width and 8m height, and you need at least 60 times air exchange per hour, then the ventilation capacity you need for the factory is 86mx22mx8mx60=113,520m³/h, if your prefered fan size is 1380mm(50inch) exhaust fan, the air volume of it is 42,000m³/h, then you will need about 3 sets of this 50inch exhaust fan for your factory.

Solution 4: Cooling Tower

A cooling tower is similar to an air cooler, however, the main difference is that the cooling tower is much larger.  Cooling towers are widely used for those factories or warehouses that are unable to install on a load bearing wall or roof.  Also, a cooling tower can cool a larger area than an air cooler, cooling approximately 400㎡/set or more.

large industrial ceiling fan, factory ceiling fan

Solution 5 :  Large Ceiling Fans

Large air volume industrial ceiling fans are a great solution for factories or warehouses with a large plant area.  Large air volume industrial ceiling fans cover a large air volume at ultra-low speeds, with 1.1-1.5kw consumption.  These fans cover an area of 1500㎡/set and are a great solution for those companies needing an inexpensive solution to cover a large plant area.

At Minxin, we are able to help you achieve an ideal, safe, and healthy environment for employees by creating industrial ventilation solutions that maintain steady airflow, temperature, and humidity within your workplace.

At Minxin, we are able to help you with ventilation solutions that maintain steady airflow, temperature, and humidity within your commercial greenhouse. We design quality exhaust fans, circulation fans, evaporative cooling pads, air coolers and conditioning systems specific to your location and ventilation needs that will create an comfortable environment for your plants and therefore increase your greenhouse’s profitability.

Our Fans for Industrial Ventilation

Wall Mount Industrial Air Cooler

The air cooler can be mounted on the wall or roof of the factory and warehouse.

  • Air volume from 18,000m³/h to 30,000m³/h
  • UV resistant and weather proof
  • Heavy duty design

Fiberglass Cone Fan

Fiberglass material for better corrosion and UV resistance.

  • Great choice for chemical factories and labs
  • Deep cone type, higher ventilation capacity
  • Available in 36inch, 40inch, 50inch and 54inch

Portable Air Cooler

This porable air cooler can be used both for residential and industrial purposes.

  • portable type for anywhere use
  • High air volume up to 12,000m³/h
  • Great choice for space around 100㎡

Portable Industrial Air Cooler

This air cooler is portable yet heavy duty, can be placed anywhere in the factory or warehouse.

  • High air volume up to 18,000m³/h
  • High energy efficiency
  • Multi-purpose applications

Push Pull Exhaust Fan

Push pull system exhaust fans are of lower noise in operation.

  • Large fan blade, large air flow
  • Anti-rust thick galvanized steel
  • Various fan sizes for choice
  • With automtic shutters to keep out rain and dust

Corrosion Resistant Ventilation Box Fan

It can be easily built in at any wall and has anti-rust and corrosion resistant materials.

  • Fully customizable fan housing including galvanized steel, 304 and 430 stainless steel
  • High ventilation efficiency
  • Multiple sizes for choice

Your Best Industrial Ventilation Partner in The World!

Minxin Industrial works with operators to help solve their complex ventilation problems. From sector specific ventilation solutions for the industrial, commercial, greenhouse, poultry, dairy and swine markets; to production manufacturing for industry sales and supply houses, Minxin delivers the world’s top organizations the ventilation exhaust fans and cooling system they need.

after-sale service

    Contact Us Now and Let's Get Your Project Done!

    Please enter your name.
    Please enter a valid phone number.
    Please enter a message.